Your Dynamic Storage Systems Experts

3D does not offer rubber bumpers as a standard option on our pushback systems. The reason for this is two-fold:

1. Rubber bumpers are sold as “noise reducers.”
While these bumpers do in fact reduce noise, when properly loading and unloading pushback lanes, you cannot hear the carts over the sounds of even an electric forklift. Furthermore, if an operator unloads a lane improperly (ie. too fast) creating a “bang”, we think it’s a good idea if other staff/management nearby know, so that they can remind the driver that he is to control the loads when emptying the lane.

Two ongoing trends have been causing headaches for warehouses utilizing bulk storage or drive-in racking – the first is the move to lighter packaging, and the second relates to ever increasing product types (SKU) with smaller and smaller lot sizes.

With lighter packaging, products that were once able to be stacked 3 or 4 high may now only be able to be stacked two high, or not stacked at all. Facilities that have large sections of bulk storage are finding their height utilization severely restricted, and may end up storing half of what they used to store in a given area.

Most of you know that 3D does not manufacture racking; we only manufacture pushback, pallet flow and carton flow components to fit into somebody else’s rack structure.

We would like to address the issue of slope in push back rack systems as there has been much talk in the industry in regards to push force and benefits of low slope.

Our unique low profile push back system was developed in 1992, and at that time one of the design features we decided on was to slope our rails at 3/8” per foot so that there would only be 2 interior beam types – a flush top and a drop 1.5”. The slope we chose had nothing to do with the performance of our carts.

Furthermore we would like to add that the slope is “free” – since we are not lifting up a pallet at the back of the lane, we only need clearance at the load/unload end. Having a bit more slope does not cost us an additional level and/or leave us with less clearance from level to level.

Learn more about FIFO Systems & LIFO Systems, their differences, similarities, and what is right for you!

What is FIFO and LIFO?
While most people know that FIFO stands for “First In, First Out” and LIFO is “Last In, First Out” the general perception in the industry goes something like this: FIFO = Good, LIFO = Bad.

Of course, as in most things in life, it’s more complicated than that. In a typical distribution center, many thousands of products are received and shipped every day and the volumes for each product vary from multiple pallets to a case or two. For the sake of this blog, we are going to only look at the items that are full pallets in/out as these are typically the products that suit FIFO storage and LIFO storage.